Jiangsu Polyester Resin products, Jiangsu Polyester Resin manufacturers & suppliers page583

Fiberglass Infusion Mat with Good Surface No Stitch Mark on Finished Product

8731.

Fiberglass Infusion Mat with Good Surface No Stitch Mark on Finished Product [Jan 10, 2025]

Introduction: Infusion mat is a sandwich complex which consists of one or two layers of chopped strand mat outside and a core of PP (resin flow zone) in the middle. It is designed for closed injection processes such ...

Company: CHANGZHOU JLON COMPOSITE CO., LTD.

450csm/180PP/450csm Stitched Flow Mat Fiberglass

8732.

450csm/180PP/450csm Stitched Flow Mat Fiberglass [Jan 10, 2025]

Introduction: Infusion mat is a sandwich complex which consists of one or two layers of chopped strand mat outside and a core of PP (resin flow zone) in the middle. It is designed for closed injection processes such ...

Company: CHANGZHOU JLON COMPOSITE CO., LTD.

One Side Csm One Side 0/90 Roving Infusion Mat with High Strength

8733.

One Side Csm One Side 0/90 Roving Infusion Mat with High Strength [Jan 10, 2025]

Introduction: Infusion mat is a sandwich complex which consists of one or two layers of chopped strand mat outside and a core of PP (resin flow zone) in the middle. It is designed for closed injection processes such ...

Company: CHANGZHOU JLON COMPOSITE CO., LTD.

386t Fiberglass Direct Roving for Filament Winding

8734.

386t Fiberglass Direct Roving for Filament Winding [Jan 10, 2025]

Introduction: 386T Direct Roving is coated with a silane-based sizing compatible with unsaturated polyester, vinyl ester, and epoxy resins. It is designed for filament winding, pultrusion, and weaving applications. ...

Company: CHANGZHOU JLON COMPOSITE CO., LTD.

High Performance Infusion Mesh for Vacuum Infusion Process

8735.

High Performance Infusion Mesh for Vacuum Infusion Process [Aug 22, 2024]

Introduction: Resin distribution media IM120 is HDPE extruded net/mesh designed to assist resin flow through your part during the VARTM process. Our resin distribution medium works well with polyester ,vinyl ester ...

Company: CHANGZHOU JLON COMPOSITE CO., LTD.

HDPE Extruded Infusion Mesh for Vartm Vacuum Infusion

8736.

HDPE Extruded Infusion Mesh for Vartm Vacuum Infusion [Aug 22, 2024]

Introduction: Resin distribution media IM120 is HDPE extruded net/mesh designed to assist resin flow through your part during the VARTM process. Our resin distribution medium works well with polyester ,vinyl ester ...

Company: CHANGZHOU JLON COMPOSITE CO., LTD.

Pultruded FRP Fiberglass Composite Antenna Covers Housing Radome Protect Base Station Antenna ...

8737.

Pultruded FRP Fiberglass Composite Antenna Covers Housing Radome Protect Base Station Antenna ... [Aug 19, 2024]

Fiberglass Radomes Product Description 5G's network uses higher frequency band than 4G--3.3-3.6GHz, 4.8-5.0GHz and 20GHz. As the protective shell of the base station antenna, the dielectric property of the radome is ...

Company: Changzhou Rule Composite Material Co., Ltd.

Softening Point 140 Temperature Hot Melt Adhesive Film for IC Card

8738.

Softening Point 140 Temperature Hot Melt Adhesive Film for IC Card [Apr 09, 2024]

Product Description 1. The appearance is transparent. 2. It can be used for cotton fabric, chemical fiber , polyester fabric, Polyamide, oxford fabric and PVC&PU leather materials' bonding. 3. It is ...

Company: Jiangyin Weitao Plastic New Material Co., Ltd.

Customizable Certified Iron Core Ring Transformer

8739.

Customizable Certified Iron Core Ring Transformer [Jan 26, 2026]

Product Description The toroidal transformer adopts a high flux iron core, which has the characteristics of low noise and high efficiency. Using industrial grade copper wire with high mechanical strength. Adopting ...

Company: Nanjing Ampere Electronic Technology Co., Ltd